Trek recalling about 10,000 Bontrager flat pedals | Road Bike Clipless Pedals

So how did the Pitbull system work? Short answer: Great — for a prototype. I rode on the pedals through and around Denver for a few hundred miles over the summer. In that time, I wrenched a few sprints from a dead stop and added in some 30-plus-mile weekend rides.

I really liked using these and was happy with the pedal body, the low weight and the simple engagement system. If Time can work out how to resolve the squeaking I experienced then the score would be higher still.

They’re not the thinnest of pedals, measuring 18mm thick at the centre of the body. Compare that to 17mm for the DMR Vaults, 15mm for the Hope F20s, 10mm for the Gamut Podiums, and 8.3mm for the OneUp flat pedals. The XT pedals do have a nice concave platform though, with the bodies measuring 20mm at the fore and aft of the platform, providing a slight bowl shape for your feet to sink into.

But I admit to liking the casual style and all-day comfort they offer, and they’re nice for sightseeing, gravel riding, commuting and the occasional play on the mountain bike, too. The XC5’s long laces (on the smaller sizes) are my biggest complaint of these shoes and, frankly, a simple oversight on Shimano’s part. Assuming the XC5s tick the boxes of what you’re after, they’re cheap enough to allow room in the budget for new laces.

The only issues I’ve witnessed is with two owners of SRAM etape systems who didn’t charge their batteries, so were stuck with limited years in the Pyrenees, but they could swap the front and rear mech batteries round, so low gears for the climbs and then big gears for the descents. Didn’t seem ideal.

Installation was simple. I had been using the wheels for last issue’s racing tyre buyer’s guide testing, so I had to install the valves as a first step. UST rims work fine with tubes, but changing is more difficult than it needs to be because of the tyre retention ledges in the rim. After doing it more than 10 times, it became easier but it never got to be as fast as a non-tubeless rim.

Well, now you can recoup all the time the bike has stolen from you by giving the gift of a skateboard! Yes, no fit person over 40 can resist the allure of a skateboard, nor can they stand on one without sustaining an injury just bad enough to keep them off the bike for awhile and force them to appreciate you! Just find a reissue deck from the halcyon days of their youth, sit back, and let physics and nostalgia do the rest: “Whoa, a Rob Roskopp! I used to have one just like this! You know, I used to be pretty good…” [Stands on skateboard, immediately breaks coccyx.] You’ll be enjoying that romantic anniversary dinner in no time—though your partner may be sitting on a doughnut.

15 of the best 2018 & 2019 road bikes under £1,000 — top choices at Cycle To Work scheme prices

Both the 11s and the 7s use a forged 6061-T6 aluminium body, which is just 13mm deep for improved ground clearance. The 11s house 10 pins per side (which can be shortened or extended) and two igus LL-glide bearings.

“These were the shiniest pedals in the grouptest, both literally and metaphorically, as they were polished to a mirror finish and loaded down with almost all of the features you’d expect from a high end flat pedal.They run fully on bearings with no bushings. The crank end contains two…” Read the full review here.

The only issues I’ve witnessed is with two owners of SRAM etape systems who didn’t charge their batteries, so were stuck with limited years in the Pyrenees, but they could swap the front and rear mech batteries round, so low gears for the climbs and then big gears for the descents. Didn’t seem ideal.

One of the other advantages of clipless pedals is that you can get more power out of your legs by being able to pull up on the pedal stroke in addition to pushing down however, this highlights the disadvantage of multi-release cleats since if you pulled up on these your foot would come out of the pedal.