17TR Player Keramik Bearing serat karbon Jockey Pulley Wheel Set Rear Derailleurs Guide Wheel
gambaran Product
* 17T ukuran gedhe sistem guide wheel set
*17T pulleys or16T pulleys
* Nyimpen 60% resistance chain gesekan dibandhingake gembong guide 11T "
* Versi prewangan Keramik nyimpen luwih saka 2,4 Watts daya saben dibandhingaké karo sistem owah-owahan asli
* Kandhang serat karbon Full
* Full 7075 aluminium CNC nglereni entheng guide setir lan batang pin
*Color: Anode red, enamel, blue, gold, green
*17TR is suitable for Shimano 6700/6770/6800/6870/9000/9070 Ultegra/DURA ACE
* Keramik Bearing Version Steel Sato Bearing Version Steel Bearing Version
* Bobot: 61.4g
Dèkné Keramik versi Bearing punika 1.2 gram korek saka versi baja Bearing
*Shifting speed increased by 20%-26% for Shimano systems.
*Support up to 11-28 cassettes, compatible with 11-30 and 11-34 with the help of an RD extender.
This is the fastest RD pulley system.
17TS & 17TR installation tips:
1, due to increased offset by the oversized pulley system, please make sure your RD and frame are aligned and calibrated correctly.
2, please check the length of your chain. Here is how to calculate, chain should be 10-20mm longer than the RD at 0 tension (shown as the picture below) when rests on the smallest chainring and smallest cog.
3, to lower the requirements for chain length and RD/frame alignment, we introduce the new 16T pulley system, 17TS and 17TR. Compare with 17T, the power saving would be lowered by about 0.2 watts but increasing chain stability and shifting speed.
Apa ngganti derailleur wheel pulley
Sepisanan, keropos watesan posisi spring bisa nyetel maneh tension umumé, nambah kekirangan babagan banget asli, lan nggawe munggah lan mudhun tension chain antarane guide setir lan cogs luwih layak.
Sareh, nomer kontak waos utawa kontrol nomer waos antarane chain lan cogs saka 17T derailleur mburi luwih sak pindah owah-owahan, iku kaya jiwitake tengah lan loro-lorone saka sawetara tabuh, sing luwih gedhe ing kontrol lever, kuwat daya kontrol.
Pamungkas, sawise mungkin ora nggambarake owahan kurva rotasi kandhang kang, ing jarak antarane wheel guide ndhuwur lan cogs wis apik.
langkah instalasi
1. samping derailleur bosok, mbusak kandhang katrol setir asli, minangka ditampilake ing tokoh (original kandhang katrol setir wis dibusak, cara aman monggo waca tokoh No.20)
2. Mangga konfirmasi aluminium alloy ring lumahing sisih beda.
3. Ing bolt nesu utama.
4. Instal mesin cuci nilon menyang derailleur mburi.
5. soyo tambah ing nesu bolt utama ing samberan, lan aplikasi pelumas.
6. Njupuk 17T serat karbon katrol wheel kandhang, nganggo No. 2 hex karusakan mbusak alloy meneng metu ing mburi kandhang katrol setir.
7. Copot wheel katrol ndhuwur.
8. Sawise njabut setir katrol ndhuwur, nginstal bolts tengah ing mburi.
9. Sadurunge instalasi bolt utama, samberan kudu greased kanthi.
10. Surung bolt utama kanthi ing basa saka kandhang katrol setir.
11. Mangga konfirmasi ring alloy lumahing alur menyang bolt utama, lan lumahing alur wis greased.
12. Mangga konfirmasi bidang ring alloy metu, lan ring alloy wis greased.
13. Mangga konfirmasi spring soyo tambah bolongan ing derailleur mburi.
14. Ing spring pin Alignment spring soyo tambah bolongan menyang derailleur mburi.
15. Konfirmasi PIN spring menyang basa saka bolongan spring posisi.
16. Instal spring.
17. didadekake siji ing pin spring karo bolongan ing kandhang katrol wheel
18. dicenthang ing 1 kanggo 4 tension imbuhan bolongan, gawan soyo tambah dhisikan bolongan 2. (tension: 4> 3> 2> 1)
19. Ing katrol kandhang wheel kanthi dipencet menyang derailleur mburi. konfirmasi Alignment bolt utama.
20. No 4 hex karusakan kanggo ngencengi bolt utama kanggo 4N.m.
21. Reset guide wheel ndhuwur, masang bolts katrol ndhuwur, nanging ora tightened.
22. Puteran kandhang katrol setir kanggo mburi derailleur mbalek pemblokiran watesan, pencet topupper katrol wheel bolt metu, Watesan pemblokiran watesan.
23. ngencengi katrol wheel bolt ndhuwur.
24. Instalasi lengkap.
According to test result, increase the rear derailleur pulley wheel size could significantly decrease the friction between the chain plates caused by polygon effects during chain bending, and reduce the resistance for saving rider’s cycling power.
The chain is composed of several short pieces with an inch long, we could see the chain as one inch long with around one hundred and ten section lines, due to small diameter of turning circle, when the lines pass through standard 11T pulley wheel, it needs a certain angle to turn the transferring direction of chain for about 180° through two wheels, after increasing the pulley wheel size, the chain turning angle are decreased, so the loss of friction is less correspondingly. The results shows that 17T is a good balance point between weight and decreasing the polygon effects, To increase the size blindly will lead to arc decreasing not obvious, together with weight and volume adding. Compared with common 11T pulley wheel, the friction loss caused by polygon effects of chain could be decreased about 60%.
Besides, under the same transferring speed of chain, the axis rotation speed of 17T is slower for saving the self friction loss during bearing rotation, smaller cycle could also reduce the resistance of each turn rotation. To upgrade this ceramic bearing saves more power loss.
Faster gear shifts. firstly, porous spring position limit could adjust back tension largely, improve the weakness of original weak stretch, and make the up and down chain tension between guide wheel and cogs much more adequately.
Sareh, nomer kontak waos utawa kontrol nomer waos antarane chain lan cogs saka 17T derailleur mburi luwih sak pindah owah-owahan, iku kaya jiwitake tengah lan loro-lorone saka sawetara tabuh, sing luwih gedhe ing kontrol lever, kuwat daya kontrol.
Pamungkas, sawise mungkin ora nggambarake owahan kurva rotasi kandhang kang, ing jarak antarane wheel guide ndhuwur lan cogs wis apik.
And we should also tell customer that the compatibility of 11-28T cogs, the length of chain is within the range of 405-410mm standard road bike chain stay, suggest using more than 114 links, but not too short chain, or it might lead to too large back tension and enlarge the tooth tip resistance between chain and pulley wheels. (In case customer just has short chain, suggesting install it to lowest tension of spring mounting hole).
It can faster SHIMANO system up and down gear to improve 20%-26%. save 2.4 watts more.
