17TSR Carbon Fiber velosipēdu aizmugurējo pārslēdzēju Trīši ritenis Keramikas gultnis Ultralight Bicycle
Produkta apraksts
* 12 / 17T super liela izmēra ceļvedis riteņu komplekts sistēma
* Ietaupa 45% ķēde berzes izturību, salīdzinot ar 11T guide riteņiem "
* Keramikas gultnis versija ietaupa vairāk nekā 2,2 vatus vidējo jaudu, salīdzinot ar sākotnējo pārvades sistēmai
* Pilns oglekļa šķiedras ceļvedis roku
* Pilns 7075 alumīnija sakausējuma CNC griešana viegls ceļvedis riteni un TC4 titāna sakausējuma vārpstu
*Color: Anode red, enamel, blue, gold, green
* 17TSR piemērots SRAM RIVAL FORCE RED
* Keramikas Gultņu Versija Hybrid Keramikas Gultņu Versija NSK tērauda gultņu versija
* Svars: 63 grami
* Keramiskais gultnis versija ir 1,2 grami vieglāki nekā tērauda nesošās versiju
1.Different from other brands with eccentric designs, we designed these two products adopting the SRAM concentric design. The benefit of such design is that it won’t have any negative impact on neither the crisp shifting feel nor the tooth capability of the cassette nor
This is also the exact reason why Shimano ceased the production of 6800/9000 and upgraded their design to R8000/9100.
Therefore, we choose 12T/17T over 17T/17T.
Compared to original transmission system with 11T pulley, our products decrease friction resistance by 45%, ceramic bearing pulleys save more than 2.2 watts on average with each pedaling, increase shifting speed by 20-26%. Enhanced chain stability by implementing narrow-wide tooth upper pulley for more accurate and crisper shifting.
2.Extended tooth for lower pulley, to prevent chains from coming off.
One thing to clarify is that, it’s not wise to implement narrow-wide tooth to any situation.
Yes, narrow-wide tooth provides better stability, but it is achieved at the cost of more friction resistance. As designers and manufacturers, we aim to be adaptable, to provide different products for different occasions, to suit your need best, not bragging a certain “high tech” which looks fancy but brings negative impact for your experience.
3. Titanium alloy CNC shaft.
To pursue the goal of lightweight, we overcame as many obstacles as possible, even it’s just for 2-4 grams of improvement. Shafts of products for ETAP and mechanical are both made of 6/4 titanium alloy. Even in original SRAM products, titanium shafts are only available with RED RD, not even ETAP, ETAP shafts are made of steel.
4.Patent design for ultra-lightweight concentric upper pulley structure.
One 7075CNC screw to fasten 7 pieces. Easy to maintain or customize while remain light and durable.
Kāpēc nomainīt pārslēdzēju trīsis ritenis
Pirmkārt, porainā pavasaris amats robeža varētu pielāgot muguras spriedzi lielā mērā, uzlabot vājumu sākotnējā vāju stiept, un padarīt uz augšu un uz leju, ķēdes spriedze starp gida ratu un zobratus daudz adekvāti.
Otrkārt, kontakta zobu numurs vai kontroles zobu skaits starp ķēdi un zobratus pakaļējā pārslēdzēja 17T ir vairāk laikā pārnesumu pārslēgšanu, tas tāpat kā šķipsnu vidū un divas puses dažu nūjām, jo lielāks vadības svira, jo lielāks kontroles jaudu.
Visbeidzot, pēc tam pārstrādāt būrī ir rotācijas līkne, attālums starp augšējo gida riteņa un zobratus, ir uzlabojusies.
Instalācijas soļi
1.Fist, find the screw of pulley wheel cage in the back of rear derailleur
2.Remove the screw with cross tip Screwdriver
3.Pull out the screw
4. Remove and grease the screw and spring before assembly the new 12-17T carbon cade
5. We suggest fix the spring in the left hole for the first time assembly
6. Grease the titanium axle before assembly new cage
7. Push the spring in the hole
8. Clockwise rotate the cage andpush into rear derailleur
9. Push all when make sure the positioning post right in the position
10. Push back the screw in the hole and fix with cross tip screwdrive
11. Finish
Concentric swing system.
SRAM has been on a different path when it comes to RD design. While Shimano and CP prefer eccentric structure, SRAM chooses concentric structure. With eccentric RD structure, the RD shifting suffers from the length difference of chain between different FD positions. If there is no FD, eccentric design is just perfect for the impact from the shifting curve from cassette to the chain length change, just like what SRAM has done for 1X system, which fulfill both the need for speedy shifting and stability.
The new Shimano DA9100 and R8000 are implementing concentric upper pulley design, which is just another example of the excellency of such design, the relatively fixed position of the upper pulley prevents negative impacts from both jumpy surface and FD shifting, ensures the accuracy and speed of RD shifting.
